Links
       
 

About the Telecom Broker Network

MPLS VPNs transport layer 2 packets across the network and encapsulate transport protocols such as ATM, Ethernet, and SONET, allowing MPLS networks to seemlessly upgrade and replace legacy layer 2 networks without requiring network reconfiguration or using protocols higher than layer 2. In comparison, layer 3 VPNs must use the layer 3 Internet Protocol (IP).

In a T1, each of the twenty-four 64 Kbps channels can connect to the Internet individually or the Internet T1 can be configured to aggregate all of the 24 channels into one large 1.544 Mbps concatenated channel.

Voice over IP (VoIP) sends voice data in packets using the Internet Protocol (IP) instead of analog waves as does plain old telephone service (POTS) lines.

The ADSL downstream receiving rate from the Internet usually varies from 1.5 to 9Mbps while the upstream sending rate usually varies from 16 to 640 Kbps.

We maintain our clients because we always do what we say we will do. This integrity is our hallmark. Call us at (888) 255-5859.

MPLS is a standardized data switching technology that optimizes network traffic flow and eases management of data networks. MPLS carves specific paths data packets that are identified by a label that saves the time needed for a router to look up the address to the next node in order to forward the packet. MPLS works with the Internet Protocol (IP), Asynchronous Transport Mode (ATM), and frame relay network protocols. MPLS allows most packets to be forwarded at the layer 2 (switching) level rather than at the layer 3 (routing) level and makes it easy to manage quality of service (QoS).

Ethernet access to the Internet is quickly becomming a popular service. Ethernet, which is usually thought of as the protocol used to connect computers and servers on a local area network (LAN), is now increasingly being used across metropolitan wide area networks (WANS) to connect corporate LANs to the Internet. The advantage of Ethernet Internet Access service is that connection speeds that range from 1 Megabit per Second (Mbps) to 1 Gigabit per Second (Gbps) can be accessed via the same protocol being used on corporate LANs.

Digital Subscriber Line Service (DSL) has become a very popular Internet access service. This is because DSL uses the existing copper pairs that already exist between most customer premise offices and the local phone company central office (CO). A DSL connection is set up between a DSL modem at the customer premise and a DSL access multiplexer, or DSLAM, at the phone company central office. Both voice and data can be run across the same DSL connection by using a filter to separate voice traffic from Internet traffic.

Exlpore why Ethernet is probably the next killer broadband delivery platform.

If you are looking for clear, concise definitions of telecommunication terms and explanations of telecom services, especially how they are used and how they work, TelecomLInks is a great place to start.

MPLS can be used to create highly-scalable IP networks with layer 2 level security as well as easy network configuration, management, and provisioning.